Pneumatics Kit 2A – Double Acting Cylinder Add-On

The cylinder in Pneumatics Kit 1 is single-acting — it uses air to extend the cylinder rod but uses a spring to return to its contracted state. As a result, the cylinder may expand and contract at different speeds.

In contrast, the cylinders in Pneumatics Kit 2 are double-acting and use compressed air to both extend and retract.

Pneumatics Kit 2A – Double Acting Cylinder Add-On

Kit 2A adds one Cylinder (Bi-directional) to Kit 1 or Kit 2

• Cannot be used without Kit 1 or Kit 2

• (1) Solenoid Driver – Cable w/Driver, Connects one VEX EDR I/O Port to one Solenoid
• (1) “T” Fitting – “T” Fitting for Valves – KQ2T04-00 or “-00A”
• (1) Cylinder, Bi-directional – Dbl Acting Cylinder 10mm Bore – NCJ2D10-200
• (1) Flow Meter – M5 elbow meter out flow control 4mm tubing – AS1201F-M5-04T
• (1) Solenoid, Fwd, Reverse – 5/2 Single Solenoid Valve, 5VDC – SYJ3120-SMO-M3-F
• (3) Fitting for Valves – Fitting 4mm Tubing x M3 Thread – KJS04-M3 or KQ2S04-M3G
• (1) Fitting for Cylinders – M5 Male Connector for Cylinders – KQ2S04-M5 or “-M5A”
• (1) Tubing – 4mm X 1696mm Length Tubing – TUO425B-X81US1696
• (1) Cylinder Nut – Nut for the Cylinder Mount – CYLINDER-NUT
• (1) Cylinder Rod Pivot – Pivot for the Cylinder Rod – CYLINDER-ROD-PIVOT
• (1) Cylinder Mount – Mount for Cylinder – CYLINDER-MOUNT